Menu
The DC-600 gradient amplifier can be used with the “Research Lab” MRI from Pure Devices to achieve much stronger gradients. This high-power gradient amplifier is four-channel current controlled and allows for the increased gradient strength needed for a range of applications, including—but not limited to—diffusion and droplet size measurements. The DC-600 high-power gradient amplifier can be used as an add-on or extension to your Pure Devices “Research Lab” MRI or your existing lab setup.
Find more info about Benchtop MRI
| Characteristic | Specification |
|---|---|
|
# Channels |
4 |
|
Current Controlled operation |
|
|
Output Current per Channel |
± 5 A |
|
Output Voltage |
60 V |
|
Settling time 10% 5 Ω 1 A |
~ 5 µsec |
|
Settling time 1% 5 Ω 2 A |
~ 10 µsec |
|
Settling time 1% 5 Ω 2 A y-grad Magspec |
~ 50 µsec |
|
Bandwidth |
> 100 kHz |
|
Voltage Control |
|
|
Output Voltage |
± 60 V |
|
Output current/channel |
±7 Amp |
|
Settling time 10% 5 Ω @ 1A |
< 2 µsec |
|
Settling time 1% 5 Ω @ 1A |
< 5 µsec |
|
RF Drive |
12 dBm @ 100 W, 18 dBm no damage |
|
Bandwidth |
> 500 kHz |
|
Input/Output |
|
|
Input Ports |
3M™ MDR 14 pins (p/n 10214-55G3PC) |
|
Input Signal |
± 15 V single ended or differential |
|
Output Port |
D-sub mixed shell 7W2 female (Harting 09 69 201 5072) |
|
Output type |
Differential |
|
LEDs |
Power, Standby, Active, & Fault |
|
Physical Specifications |
|
|
Dimensions |
25 x 14 x 30 cm ( 19" case height 3 U) |
|
Weight |
5.3 kg |
|
Mains Power |
85 - 264 VAC, 46-63 Hz, 1500 W max |